Micronik Infinitiv A1200 Tower Case Project - Revision history

Tiago: /* Reference */

Tiago — Sat, 06 Nov 2010 17:39:34 GMT

Reference

←Older revision		Revision as of 17:39, 6 November 2010
Line 113:		Line 113:

	==Reference==		==Reference==
-	* [http://www.lobodias.com/ http://www.lobodias.com/] (2008) - [http://www.lobodias.com/commodore_amiga/~~amiga1200tower~~.htm Amiga 1200 Tower Project]; Website.	+	* [http://www.lobodias.com/ http://www.lobodias.com/] (2008) - [http://www.lobodias.com/commodore_amiga/amiga_1200_tower.htm Amiga 1200 Tower Project]; Website.

	[[Category:Hardware]][[Category:Amiga - DIY Projects]]		[[Category:Hardware]][[Category:Amiga - DIY Projects]]

Tiago at 21:27, 17 June 2009

Tiago — Wed, 17 Jun 2009 21:27:45 GMT

←Older revision		Revision as of 21:27, 17 June 2009
Line 61:		Line 61:
	I will now think of install OS3.9		I will now think of install OS3.9

-	~~Some weeks after~~ the ~~soldering work with the reset button~~, i ~~change my M.Board~~ from Rev 1D1 to Rev 1D4 ~~(see pictures below)~~, ~~and i~~ didn't want to make any soldering work as i did in the older board, so i got a new solution: i bought the Gayle chip adapter.	+	Just got a new board for the tower, i update from a Rev 1D1 to Rev 1D4.
		+	Here it is, the new Rev 1D4 with the Blizzard 030, perfect!! [[image:A1200-tower-new-board.JPG\|225px]]<br />
		+
		+	I didn't want to make any soldering work for the reset cable as i did in the older board, so i got a new solution: i bought the Gayle chip adapter.
	[[image:gaylechipadapter_onboard.jpg\|225px]]<br />		[[image:gaylechipadapter_onboard.jpg\|225px]]<br />
	This small board goes on top of the Gayle Chip adapter and it has the 2 pins for the reset cable and also 14 pins for a clock port adapter.		This small board goes on top of the Gayle Chip adapter and it has the 2 pins for the reset cable and also 14 pins for a clock port adapter.

Tiago at 21:19, 17 June 2009

Tiago — Wed, 17 Jun 2009 21:19:45 GMT

←Older revision		Revision as of 21:19, 17 June 2009
Line 61:		Line 61:
	I will now think of install OS3.9		I will now think of install OS3.9

-	Some weeks after the soldering work with the reset button, i change my M.Board from Rev 1D1 to Rev 1D4 (see pictures below), and i didn't want to make any soldering work as i did in the older board, so i got a new solution: o bought the Gayle chip adapter.	+	Some weeks after the soldering work with the reset button, i change my M.Board from Rev 1D1 to Rev 1D4 (see pictures below), and i didn't want to make any soldering work as i did in the older board, so i got a new solution: i bought the Gayle chip adapter.
	[[image:gaylechipadapter_onboard.jpg\|225px]]<br />		[[image:gaylechipadapter_onboard.jpg\|225px]]<br />
	This small board goes on top of the Gayle Chip adapter and it has the 2 pins for the reset cable and also 14 pins for a clock port adapter.		This small board goes on top of the Gayle Chip adapter and it has the 2 pins for the reset cable and also 14 pins for a clock port adapter.

Tiago at 21:17, 17 June 2009

Tiago — Wed, 17 Jun 2009 21:17:11 GMT

←Older revision		Revision as of 21:17, 17 June 2009
Line 14:		Line 14:
	==Hardware Spec==		==Hardware Spec==
	* Micronik Infinitiv A1200 Tower Case (with PC AT PSU and PC keyboard adapter)		* Micronik Infinitiv A1200 Tower Case (with PC AT PSU and PC keyboard adapter)
-	* A1200 Motherboard	+	* A1200 Motherboard (update from Rev 1D1 to 1D4)
	* Kickstart 3.1 roms		* Kickstart 3.1 roms
	* 32 MB RAM Blizzard 1230 MK-IV Phase 5		* 32 MB RAM Blizzard 1230 MK-IV Phase 5
Line 60:		Line 60:
	The Infinitiv tower case is prepared to receive a expansion board, i even didn't need to remove the plastic case from the board side, just inserted from the top, it has a kind of draw to hold it. With this card i give it a great boost to the system. working in workbench is much more faster then before and Whdload installed in Classicwb runs all the games i tried so far.		The Infinitiv tower case is prepared to receive a expansion board, i even didn't need to remove the plastic case from the board side, just inserted from the top, it has a kind of draw to hold it. With this card i give it a great boost to the system. working in workbench is much more faster then before and Whdload installed in Classicwb runs all the games i tried so far.
	I will now think of install OS3.9		I will now think of install OS3.9
		+
		+	Some weeks after the soldering work with the reset button, i change my M.Board from Rev 1D1 to Rev 1D4 (see pictures below), and i didn't want to make any soldering work as i did in the older board, so i got a new solution: o bought the Gayle chip adapter.
		+	[[image:gaylechipadapter_onboard.jpg\|225px]]<br />
		+	This small board goes on top of the Gayle Chip adapter and it has the 2 pins for the reset cable and also 14 pins for a clock port adapter.

	==Project Gallery==		==Project Gallery==
Line 87:		Line 91:
	Image:blizzard_030_050.jpg\|"Blizzard 030 mkIV processor"		Image:blizzard_030_050.jpg\|"Blizzard 030 mkIV processor"
	Image:blizzard_030_mkIV_back.jpg\|"Blizzard 030 mkIV back"		Image:blizzard_030_mkIV_back.jpg\|"Blizzard 030 mkIV back"
		+	Image:gaylechipadapter_front.jpg\|"Gayle Chip Adapter front"
		+	Image:gaylechipadapter_back.jpg\|"Gayle Chip Adapter back"
		+
		+	Image:A1200-new-old-board.JPG\|"A1200T board new-left and old-right"
		+	Image:a1200-tower-keyb.jpg\|"A1200T Keyboard adapter"
		+	Image:A1200-tower-board-1.JPG\|"A1200T Board view 1"
		+	Image:A1200-tower-board-2.JPG\|"A1200T Board view 2"
		+
	</gallery>		</gallery>

Tiago at 21:01, 17 June 2009

Tiago — Wed, 17 Jun 2009 21:01:07 GMT

←Older revision		Revision as of 21:01, 17 June 2009
Line 22:		Line 22:
	* PCMCIA 90º angle adapter		* PCMCIA 90º angle adapter
	* [[CD-Rom to RCA audio project\|CD-Rom audio to RCA (Phono) output]]		* [[CD-Rom to RCA audio project\|CD-Rom audio to RCA (Phono) output]]
		+	* Gayle chip adapter

	==Project details==		==Project details==

Tiago at 13:53, 26 December 2008

Tiago — Fri, 26 Dec 2008 13:53:19 GMT

←Older revision		Revision as of 13:53, 26 December 2008
Line 83:		Line 83:
	Image:blizzard_030_mkIV_1.jpg\|"Blizzard 030 mkIV image 1"		Image:blizzard_030_mkIV_1.jpg\|"Blizzard 030 mkIV image 1"
	Image:blizzard_030_mkIV_3.jpg\|"Blizzard 030 mkIV image 3"		Image:blizzard_030_mkIV_3.jpg\|"Blizzard 030 mkIV image 3"
-	Image:A1200T_blizzard_030_mkIV.jpg\|"Blizzard 030 mkIV in tower ~~image 3~~"	+	Image:A1200T_blizzard_030_mkIV.jpg\|"Blizzard 030 mkIV in tower"
	Image:blizzard_030_050.jpg\|"Blizzard 030 mkIV processor"		Image:blizzard_030_050.jpg\|"Blizzard 030 mkIV processor"
	Image:blizzard_030_mkIV_back.jpg\|"Blizzard 030 mkIV back"		Image:blizzard_030_mkIV_back.jpg\|"Blizzard 030 mkIV back"

Tiago at 13:48, 26 December 2008

Tiago — Fri, 26 Dec 2008 13:48:20 GMT

←Older revision		Revision as of 13:48, 26 December 2008
Line 8:		Line 8:
	\|Kickstart = 3.1		\|Kickstart = 3.1
	\|OS = 3.1		\|OS = 3.1
-	\|CPU = [[~~68020~~]] @ ~~14MHz~~	+	\|CPU = [[68030]] @ 50MHz
-	\|Memory = 2[[Ram Explained\|MB]] (2[[Ram Explained\|MB]] Chip + 32[[Ram Explained\|MB]] Fast)	+	\|Memory = 34[[Ram Explained\|MB]] (2[[Ram Explained\|MB]] Chip + 32[[Ram Explained\|MB]] Fast)
	}}		}}

Tiago at 11:06, 26 December 2008

Tiago — Fri, 26 Dec 2008 11:06:57 GMT

←Older revision		Revision as of 11:06, 26 December 2008
Line 55:		Line 55:

	I received my memory expansion in 24-12-2008. A beutifull Blizzard 1230 MK-IV with 32MB Ram from Phase 5.		I received my memory expansion in 24-12-2008. A beutifull Blizzard 1230 MK-IV with 32MB Ram from Phase 5.
-		+	[[image:blizzard_030_mkIV_1.jpg\|225px]]<br />
		+	I bought it from an old store here in Portugal.
		+	The Infinitiv tower case is prepared to receive a expansion board, i even didn't need to remove the plastic case from the board side, just inserted from the top, it has a kind of draw to hold it. With this card i give it a great boost to the system. working in workbench is much more faster then before and Whdload installed in Classicwb runs all the games i tried so far.
		+	I will now think of install OS3.9

	==Project Gallery==		==Project Gallery==

Tiago at 10:55, 26 December 2008

Tiago — Fri, 26 Dec 2008 10:55:27 GMT

←Older revision		Revision as of 10:55, 26 December 2008
Line 9:		Line 9:
	\|OS = 3.1		\|OS = 3.1
	\|CPU = [[68020]] @ 14MHz		\|CPU = [[68020]] @ 14MHz
-	\|Memory = 2[[Ram Explained\|MB]] (2[[Ram Explained\|MB]] Chip + 0[[Ram Explained\|MB]] Fast)	+	\|Memory = 2[[Ram Explained\|MB]] (2[[Ram Explained\|MB]] Chip + 32[[Ram Explained\|MB]] Fast)
	}}		}}

Line 16:		Line 16:
	* A1200 Motherboard		* A1200 Motherboard
	* Kickstart 3.1 roms		* Kickstart 3.1 roms
		+	* 32 MB RAM Blizzard 1230 MK-IV Phase 5
	* [[IDE Interface - connect to HD\|Buffered IDE Interface eyetech MK4]]		* [[IDE Interface - connect to HD\|Buffered IDE Interface eyetech MK4]]
	* 3.5" Harddrive		* 3.5" Harddrive
	* CD-Rom Drive		* CD-Rom Drive
	* PCMCIA 90º angle adapter		* PCMCIA 90º angle adapter
-	* 8MB PCMCIA Ram card (not yet)
	* [[CD-Rom to RCA audio project\|CD-Rom audio to RCA (Phono) output]]		* [[CD-Rom to RCA audio project\|CD-Rom audio to RCA (Phono) output]]

Line 54:		Line 54:
	Other problem that i found was the floppy eject button. The hole in the front case was not center related to the eject button, the hole was a bit to the left, i cut a bit of the plastic, the hole went a little bigger, and also i enlarge the eject button.		Other problem that i found was the floppy eject button. The hole in the front case was not center related to the eject button, the hole was a bit to the left, i cut a bit of the plastic, the hole went a little bigger, and also i enlarge the eject button.

-	~~Now~~ I ~~am waiting for the 8MB RAM~~ expansion~~, and maybe later an accelerator [[68030]] !!~~	+	I received my memory expansion in 24-12-2008. A beutifull Blizzard 1230 MK-IV with 32MB Ram from Phase 5.
		+

	==Project Gallery==		==Project Gallery==
Line 77:		Line 78:
	Image:A1200t_roms_old_30.jpg\|"A1200T old roms 3.0 image 1" old roms 3.0		Image:A1200t_roms_old_30.jpg\|"A1200T old roms 3.0 image 1" old roms 3.0
	Image:A1200t_roms_new_31.jpg\|"A1200T new roms 3.1 image 1" old roms 3.1		Image:A1200t_roms_new_31.jpg\|"A1200T new roms 3.1 image 1" old roms 3.1
		+	Image:blizzard_030_mkIV_1.jpg\|"Blizzard 030 mkIV image 1"
		+	Image:blizzard_030_mkIV_3.jpg\|"Blizzard 030 mkIV image 3"
		+	Image:A1200T_blizzard_030_mkIV.jpg\|"Blizzard 030 mkIV in tower image 3"
		+	Image:blizzard_030_050.jpg\|"Blizzard 030 mkIV processor"
		+	Image:blizzard_030_mkIV_back.jpg\|"Blizzard 030 mkIV back"
	</gallery>		</gallery>

Tiago: /* Reference */

Tiago — Sat, 13 Dec 2008 01:46:45 GMT

Reference

←Older revision		Revision as of 01:46, 13 December 2008
Line 88:		Line 88:

	==Reference==		==Reference==
-	* [http://www.lobodias.com/ http://www.lobodias.com/] (2008) - [http://~~pwp~~.~~netcabo~~.~~pt/0255980901~~/commodore_amiga/amiga1200tower.htm Amiga 1200 Tower Project]; Website.	+	* [http://www.lobodias.com/ http://www.lobodias.com/] (2008) - [http://www.lobodias.com/commodore_amiga/amiga1200tower.htm Amiga 1200 Tower Project]; Website.

	[[Category:Hardware]][[Category:Amiga - DIY Projects]]		[[Category:Hardware]][[Category:Amiga - DIY Projects]]

←Older revision		Revision as of 13:53, 26 December 2008
Line 83:		Line 83:
	Image:blizzard_030_mkIV_1.jpg\|"Blizzard 030 mkIV image 1"		Image:blizzard_030_mkIV_1.jpg\|"Blizzard 030 mkIV image 1"
	Image:blizzard_030_mkIV_3.jpg\|"Blizzard 030 mkIV image 3"		Image:blizzard_030_mkIV_3.jpg\|"Blizzard 030 mkIV image 3"
-	Image:A1200T_blizzard_030_mkIV.jpg\|"Blizzard 030 mkIV in tower ~~image 3~~"	+	Image:A1200T_blizzard_030_mkIV.jpg\|"Blizzard 030 mkIV in tower"
	Image:blizzard_030_050.jpg\|"Blizzard 030 mkIV processor"		Image:blizzard_030_050.jpg\|"Blizzard 030 mkIV processor"
	Image:blizzard_030_mkIV_back.jpg\|"Blizzard 030 mkIV back"		Image:blizzard_030_mkIV_back.jpg\|"Blizzard 030 mkIV back"