CD-Rom to RCA audio project

From Classicamiga

Revision as of 06:17, 28 November 2008 (view source) Harrison (Talk | contribs) (→Project details) ← Previous diff		Revision as of 06:17, 28 November 2008 (view source) Harrison (Talk | contribs) (→Hardware Spec/Parts Needed) Next diff →
Line 14:		Line 14:
	==Hardware Spec/Parts Needed==		==Hardware Spec/Parts Needed==
	* RCA audio cable with left and right phono connectors		* RCA audio cable with left and right phono connectors
		+	* CD-Rom audio cable
	* PCI style metal backplate		* PCI style metal backplate
	* Hot Glue Gun		* Hot Glue Gun

---

Revision as of 06:17, 28 November 2008

CD-Rom audio to RCA (Phono) output
CD-Rom to RCA Audio
Created	2008
Creator	Tiago
Based On	Custom
Kickstart
Operating System
CPU
Memory

Contents 1 Hardware Spec/Parts Needed 2 Project details 3 Project Gallery 4 Additional Reading 5 Reference

Hardware Spec/Parts Needed

• RCA audio cable with left and right phono connectors
• CD-Rom audio cable
• PCI style metal backplate
• Hot Glue Gun

Project details

This small project was designed to route the audio from an internal CD-Rom drive out of the computers case to a pair of RCA Phono audio connectors mounted on a PCI style backplate.

Project Gallery

Mini A1200

"A1200T back with RCAs image 1" Case back

Additional Reading

See also:

• A1200 Upgrade Options.
• Amiga Reference Books.

Reference

• http://www.lobodias.com/ (2008) - Amiga 1200 Tower Project; Website.